REFERENCES

SKIN LASER THERAPY


LumiLift gives you an ergonomic wrap around facial panel that houses 400 Extreme Super Luminous Diodes. It curves around the face and neck, 2 inches above you.  Visible results are achieved with the first treatment.  Six to ten treatments are suggested for a lasting result.

Two treatment modes: LumiLift and LumiFacial

LumiLift is the only application on the market that combines light therapy, micronized currents and HF Polarized currents to provide greatly enhanced treatments to rejuvenate the skin from the lowest layers upward.

LumiLift includes four high-tech lifting and smoothing electrodes using our multi-platform technology.

  • Photo rejuvenation for collagen production the red Extreme Super Luminous Diodes (ESLDs ) (not 10 like others). These LEDs are a new advanced technology.  Very relaxing with no pain
  • Blue ESLDs improves acne prone skin through it’s purifying properties
  • Green ESLDs reduces dark pigmentation by penetrating the basal layer.
  • Yellow lights treat redness and are also used for soothing, draining and detoxifying. Absorbed by the body fluids, it improves the lymph and blood circulatory system.

 

The LumiLift gives fast muscle firming with deep micronized current product infusion.  Photo rejuvenation is achieved at the same time. The LumiFacial and LumiLift functions offer pre-programmed settings and a wide variety of programs to effectively treat and extended range of skin conditions.

The LumiLift is fully upgradeable.  This means, as technology advances, new programs can be added.  The LumiLift will neverbe obsolete.

Clients and patients say it is better than laser, oxygen, injections and lower powered photo rejuvenation machines. Fast results!!

High-tech Face Lift – Laser Therapy for Skin


 

 LED Treatments – Through Deep Penetrating Light

LUMIFACIAL

LumiFacial.com combines photo-modulation with pure spectrum wavelengths to treat acne hyper-pigmentation, redness, and photo-aging.

How does the LumiFacial treatment work?

During the treatment, a wrap-around facial panel is positioned in front of your face. (904LASER.COM} selects the specific Light energy required for your skin type and condition). Blue light at 470 nm improves acne through its purifying and antibacterial properties. Green light at 525 nm reduces pigmentation by penetrating into the basal layers. Yellow light at 590 nm treats redness and is also used for its soothing, draining and detoxifying properties. Absorbed by the body fluids, it improves the lymph and blood circulatory system.

Red light at 640 nm increases collagen production and stimulating fibroblast cells and cell growth.

How new is this Technology?

This technology was discovered by NASA initially and has been used to treat wounds in outer space as a result of it’s ability to produce collagen and heal tissue. Research has been conducted over a period of 5+years. They have since learned that “extreme” super luminous diodes (vs. super luminous diodes used in various other systems ) can increase collagen production by 5 fold. Up to now, treatments targeted individual problems.lumiLift. is the first treatment device to combine two proven technologies: Light energy and micro currents to treat conditions in the epidermis, dermis, and muscular levels of the face, décolleté and hands without discomfort. This system treats the skin from the inside-out. Various benefits include lifting, firming, tightening, even skin tone, pigment reduction, improve acne, minimize wrinkles etc. Results are cumulative and a series is typically recommended for maximum benefits.

(See below for link to view Nasa Articles.)

What is exactly the LumiLift® procedure?

The LumiLift® procedure is a revolutionary way of rejuvenating the skin and lifting sagging muscles. It is performed with two (2) special electrodes that feature an advanced application of Micronized current, HF polarized current and light energy. (See pictures above)

During the LumiLift® treatment, a pulsating light is directed at the skin surface. Light passes through the layers of the skin and penetrates into the dermis. This powerful light stimulates the fibroblast cell to produce more collagen. The increase production of collagen smoothes and softens the appearance of wrinkles, reduces the size of pores, and improves skin texture. At the same time, the electrodes emit Micronized currents to tone and life sagging muscles.

At the end of the treatment, an antioxidant product is infused into your skin using two special electrodes to smooth away facial creases.

What are Micronized currents?

Micronized currents are non-invasive. They stimulate and resemble the biological currents that your body produces to tighten muscles. Extensive clinical research has shown that these currents are able to lift and tone the muscles. Most systems do not address the muscular layer. This layer atrophies as a result of intrinsic aging and must be addressed, not just the tissue alone. This is what makes this system so unique and effective.

Combining Light Therapy with Micronized currents erases years from the appearance of your skin without the use of drastic and painful surgical procedures. LumiLift® restores a natural, youthful appearance to the skin.

How does the LumiFacial® treatment work? (panel portion)

The LumiFacial® targets common skin problems; such has acne, redness, and uneven pigmentation. During the treatment, a wrap-around facial panel is positioned in above your face. The physician or technician selects the specific Light energy required for your skin type and condition. At the end of the treatment, the technician will apply specialty products using a polarized current. This final step enhances the penetration of these products and promotes their efficacy. You can immediately return to your normal routine with no redness or peeling.

How long will the effects of the LumiLift procedure last?

Improvements continue for a minimum of three (3) months after a single session. Results are cumulative as fibroblast production CONTINUES to occur as a result of the photo-energy stimulation. After completing a series, depending on the rate of the aging process, changes can last over one year. A good skin care regimen combined with a monthly maintenance treatment is sufficient to enhance and maintain the result of obtain with the LumiLift® treatment.

How does this differ from Microdermabrasion or Peels?

This system is very effective for treating many conditions. However, exfoliation is still “key” to remove the dead skin cell layers to promote a healthy glow, allow for greater product penetration, and to renew the very outer layer of the skin. Facials, Peels or Microdermabrasion are still highly recommended at 4 week intervals in order to generate newer healthier skin cells. Both stimulate collagen product and improve skin texture. They compliment and improve the efficacy of the photo rejuvenation system.

The following treatments take 30 minutes to an hour depending on # of areas treated and skin condition.

Your Treatment Options:

LumiLift® Treatment, ideal for lifting face, eyes, and chest. Minimizes lines and wrinkles and lifts and tones the facial contours. Especially effective for sagging jowls and naso-labial folds.

The Treatments

  •  A single 30-minute treatment produces amazing results
  • Your client can immediately see and feel the difference
  • Rejuvenated cell functions continue to bring about improvements for as long as three months following the completion of the basic treatment plansupport.

What is the LumiLift.com®

LumiLift works from the inside… out

This treatment is a complete photo-rejuvenation procedure that combines the effects of Light energy. Micronized currents and HF Polarized currents to produce skin rejuvenation that is safe, comfortable, and effective.

Aging occurs on three levels; epidermal, dermal, and in the muscle tissue beneath, producing dehydration lines, dull and lifeless complexion, _expression wrinkles, deep wrinkles around the lips, frown lines, sagging jowls and naso-labial fold. reaches down into all three levels to rejuvenate skin tissue and lift muscles, erasing years… something that light alone cannot do.

How does the LumiLift® work?

During treatment, two specially designed lifting electrodes, each with forty (40) powerful Extreme Super-Luminous LEDs – more powerful and of higher quality than regular LEDs – pulsate light at a wavelength of 640 nanometers and use high power density to stimulate light absorbing photo-receptors in the skin to induce a cellular response. Pulsed red light triggers a wave of energy that stimulates the fibroblasts cells’ functions and repari mechanisms.

Unlike Intense Pulsed Light (IPL) and lasers that rely on thermal injuries to prompt the skin to repair itself, Extreme Super-Luminous LEDs are noninvasive, pure polarized narrow band frequencies that are safer than natural sunlight because there are no harmful UV rays.

While the ESLDs are at work, the transmits Micronized currents through the lifting electrodes. Harmonizing with the natural bioelectrical currents found in the body, they reconstruct or re-educate muscle tissue, achieving visble lifting results, restoring facial contour, and slowing the aging process. The easy-to-use computerized settings precisely deliver the best parameters for both Micronized currents and Photo-Modulation.

During the last part of the LumiLift® treatment, HF Polarized currents are applied byt two smoothing electrodes. The esthetician uses a gentle, ironing motion to smooth away fine lines and wrinkles.

Pre-programming delivers HF Plarized current at the optimum intensity. The esthtician simply selects the desired treatment – face, eyes, chest or hands – and the  chooses the right parameters to achieve maximum results for each skin type.

While the Extreme Super-Laminous LEDs are at work, the transmits Mirconized currents through the lifting electrodes. Micronized currents harmonize with the natural bioelectrical currents found in the body. They reconstruct or re-educate muscle tissue, achieving visible lifting results, restoring facial contour and slowing the aging process.

What is the {LumiFacial.com}®?

LumiFacial is light

Silhouet-Tone has chosen four specific wavelengths – each well absorbed by skin tissue – proven to provide extraordinary therapeutic and repairing effects. When applied with the necessary power density and duration, each color has a unique and direct impect on the cells responsible for skin problems. By using a combination of pure spectrum colors to optimize results during LumiFacial® treatments, the 904LASER.COM is the most efficient and powerful unit available today.

The LumiFacial® program focuses on nagging skin conditions such as:

  • Acne prone skin
  • Redness and Couperose skin
  • Pigmentation problems
  • Photo-aging

Why is light important?

904laser.com LumiFacial® panel combines the interaction of 400 ESLDs:

Blue light at 470 nm (nanometers) improves acne prone skin through its purifying and antibacterial properties.

Green light at 525 nm reduces pigmentation by penetrating into the basal layers.

Yellow light at 590 nm treats redness and is also used for its soothing, draining and detoxifying properties. Absorbed by the body fluids, it improves the lymph and blood circulatory system.

Red light at 640 nm increases collagen production fivefold in the skin, triggering repair mechanisms and stimulating fibroblast cells and cell growth.

Each color is phot-modulated, in a pulsed or constant mode, insuring specific focus and delivery of the correct light at the location of the problem. After treatment, the unit shuts off by itself, freeing the operator to provide other services for the client during the treatment or to care for other clients.

Powered by extreme Super-Luminous LEDs which are more powerful, higher quality light source than regular LEDs. Each visible color is applied by pure narrow band ESLDs. With four hundred (400) ESLDs

4 LumiLift.com® programs

computerized deliver the best parameters every time for both Micronized currents and Photo-Modulation. Simply select the desired treatment.

LumiLift® programs:       Face   Chest

Eyes   Hands

8 LumiFacial.com® programs

The microcomputer will activate the LumiFacial® panel selecting automatically the blend of colors and wavelengths needed for the treatment. From this combination, results are optimized. Each color application supplements the effects of the others used during the course of the treatment, leading to a further amplification of these successful photo-modulation procedures.

LumiFacial® Programs:

  • Acne Vulgaris
  • Acne with irritation
  • Pigmentation problems on normal to dry skin
  • Pigmentation problems on combination to oily skin
  • Redness on normal to dry skin
  • Redness on combination to oily skin
  • Photo-aging on normal to dry skin
  • Photo-aging on combination to oily skin

During the last part of the LumiLift treatment, HF Polarized currents are used with two specific smoothing electrodes. The esthectician proceeds with a gentle, ironing motion that moothes away fine lines and wrinkles

LumiLift.com  and LumiFacial.com simultaneous application.

Enhances their individual effectiveness, promoting cellular rejuvenation from within.

What is the LumiFacial and how does it work?

The LumiFacial treatment combines the application & interaction of four different colors … not just one.Blue light at 470 nm (nanometers)

improves acne prone skin. It penetrates into the superficial dermis and has a calming and regulating effect on the sebaceous gland.Green light at 525 nm

decreases melanin production, reduces pigmentation and eliminates the redness associated with the use of chemical peel and bleaching products.Yellow light at 590 nm

used for its healing, draining and detoxifying properties. It is absorbed by the body fluids in the lymph & blood circulatory systems and promotes wound healing. It increases lymphatic flow to evacuate more waste products and boosts cellular activity.Red light at 640 nm

increases collagen production by 5 fold in the skin, triggering repair mechanisms and stimulating fibroblast cells and cell growth. It increases circulation and speeds up the healing process by carrying more oxygen and nutrients to the skin. Red spectrum light is absorbed by all skin layers especially the DERMIS.

LumiFacial information and photos – Courtesy of 904laser.com